Factory Cheap Heat Loss Thermal Imaging - MSA Contactless Temperature Measuring Thermopile Infrared Sensor Module for Access Control System – Sunshine

Overview

Interface Definitions

Main Technical Parameters

DS ratio: standard 8:1, converted to FOV about 8°

Infrared wavelength range: 8-14 μm

Accuracy of temperature data transmission: 0.1 ℃

Temperature measurement range:

Universal: 0~300℃

Special: 23~46℃ (with body temperature compensation)

Precision:

Universal: ±2℃ or 2% of measured temperature

Special: ±0.3℃

Communication: UART serial port

Interface Type :2.0mm – 4PIN, Wiring optional

Electrical characteristics: voltage range DC 5~7 V, power≤40 mW

Working and Storage Conditions:

Working Temperature: 0~50℃

Storage Temperature and Humidity: -20~80℃; 45% RH Non-condensate

Temperature calibration index: Calibration at 2.5cm when 37℃;

The best distance of human frontal temperature detection: 20~50 cm;

Applications and Attentions

Applications:

General Type: industrial electric power temperature measurement

Special Type: human body temperature measurement

Attentions:

► YY-MSA type temperature measurement module is severely affected by the fluctuation of ambient temperature, it is forbidden to be tested by bare machine, or to be used in a thermal shock way, such as direct blowing at the air conditioning port.

► When the shell installed and powered on, the module temperature can be measured accurately because the module needs to reach the thermal balance with the ambient temperature. When the thermal balance is reached, the ambient temperature is allowed to change slowly, such as the heating of the housing. According to experience, the heat balance time is 15~25 minutes (depending on the heating and insulation of different housing).